logo

Maryland Metrics: Fenaflex
dimensions and part numbers

SIZES F40 - 60 SIZES F70 - 220 B FLANGE F40 - F120    B FLANGE F140 - F250
Diagram Diagram   Diagram Diagram Diagram Diagram
F H F H B B

Dimensions of Fenaflex Flanges Types F, H & B

Older number system Newer number system       Max Bore Types F & H Type B Screw                
Catalogue ‡ Code Catalogue ‡ Code Size Type Bush No. # Metric Inch L E J† L E over Key A C D F G§ M¶ Mass* (kg) Inertia* (kgm2)
  033A0501 F40 B – 32 – – – 29 33 22 M5 104 82 – – – 11 0.8 0.00074
033A0802 033A0502 F40 F 1008 25 1" 33 22 29 – – – 104 82 – – – 11 0.8 0.00074
033A0803 033A0503 F40 H 1008 25 1" 33 22 29 – – – 104 82 – – – 11 0.8 0.00074
  033B0501 F50 B – 38 – – – 38 45 32 M5 133 100 79 – – 12.5 1.2 0.00115
033B0802 033B0502 F50 F 1210 32 1 1/4" 38 25 38 – – – 133 100 79 – – 12.5 1.2 0.00115
033B0803 033B0503 F50 H 1210 32 1 1/4" 38 25 38 – – – 133 100 79 – – 12.5 1.2 0.00115
  033C0501 F60 B – 45 – – – 38 55 38 M6 165 125 70 – – 16.5 2 0.0052
033C0802 033C0502 F60 F 1610 42 1 5/8" 42 25 38 – – – 165 125 103 – – 16.5 2 0.0052
033C0803 033C0503 F60 H 1610 42 1 5/8" 42 25 38 – – – 165 125 103 – – 16.5 2 0.0052
  033D0301 F70 B – 50 – – – – 47 35 M10 187 144 80 50 13 11.5 3.1 0.009
033D0802 033D0302 F70 F 2012 50 2" 44 32 42 – – – 187 144 80 50 13 11.5 3.1 0.009
033D0803 033D0303 F70 H 1610 42 1 5/8" 42 25 38 – – – 187 144 80 50 13 11.5 3 0.009
  033E0302 F80 B – 60 – – – – 55 42 M10 211 167 98 54 16 12.5 4.9 0.018
033E0802 033E0303 F80 F 2517 60 2 1/2" 58 45 48 – – – 211 167 97 54 16 12.5 4.9 0.018
033E0803 033E0304 F80 H 2012 50 2" 45 32 42 – – – 211 167 98 54 16 12.5 4.6 0.017
  033F0301 F90 B – 70 – – – – 63.5 49 M12 235 188 112 60 16 13.5 7.1 0.032
033F0802 033F0302 F90 F 2517 60 2 1/2" 59.5 45 48 – – – 235 188 108 60 16 13.5 7 0.031
033F0803 033F0303 F90 H 2517 60 2 1/2" 59.5 45 48 – – – 235 188 108 60 16 13.5 7 0.031
  033G0301 F100 B – 80 – – – – 70.5 56 M12 254 216 125 62 16 13.5 9.9 0.055
033G0802 033G0302 F100 F 3020 75 3" 65.5 51 55 – – – 254 216 120 62 16 13.5 9.9 0.055
033G0803 033G0303 F100 H 2517 60 2 1/2" 59.5 45 48 – – – 254 216 113 62 16 13.5 9.4 0.054
  033H0301 F110 B – 90 – – – – 75.5 63 M12 279 233 128 62 16 12.5 12.5 0.081
033H0802 033H0302 F110 F 3020 75 3" 63.5 51 55 – – – 279 233 134 62 16 12.5 11.7 0.078
033H0803 033H0303 F110 H 3020 75 3" 63.5 51 55 – – – 279 233 134 62 16 12.5 11.7 0.078
  033J0301 F120 B – 100 – – – – 84.5 70 M16 314 264 143 67 16 14.5 16.9 0.137
033I0802 033J0302 F120 F 3525 100 4" 79.5 65 67 – – – 314 264 140 67 16 14.5 16.5 0.137
033I0803 033J0303 F120 H 3020 75 3" 65.5 51 55 – – – 314 264 140 67 16 14.5 15.9 0.130
  033K0301 F140 B – 130 – – – – 111 94 M20 359 311 178 73 17 16 22.2 0.254
033J0802 033K0302 F140 F 3525 100 4" 81.5 65 67 – – – 359 311 178 73 17 16 22.3 0.255
033J0803 033K0303 F140 H 3525 100 4" 81.5 65 67 – – – 359 311 178 73 17 16 22.3 0.255
  033L0301 F160 B – 140 – – – – 117 102 M20 402 345 187 78 19 15 35.8 0.469
033L0802 033L0302 F160 F 4030 115 4 1/2" 92 77 80 – – – 402 345 197 78 19 15 32.5 0.380
033L0803 033L0303 F160 H 4030 115 4 1/2" 92 77 80 – – – 402 345 197 78 19 15 32.5 0.380
  033Q0301 F180 B – 150 – – – – 137 114 M20 470 398 200 94 19 23 49.1 0.871
033Q0802 033Q0302 F180 F 4535 125 5" 112 89 89 – – – 470 398 205 94 19 23 42.2 0.847
033Q0803 033Q0303 F180 H 4535 125 5" 112 89 89 – – – 470 398 205 94 19 23 42.2 0.847
  033M0301 F200 B – 150 – – – – 138 114 M20 508 429 200 103 19 24 58.2 1.301
033M0802 033M0302 F200 F 4535 125 5" 113 89 89 – – – 508 429 205 103 19 24 53.6 1.281
033M0803 033M0303 F200 H 4535 125 5" 113 89 89 – – – 508 429 205 103 19 24 53.6 1.281
  033N0301 F220 B – 160 – – – – 155 127 M20 562 474 218 118 20 27.5 79.6 2.142
033N0802 033N0302 F220 F 5040 125 5" 130 102 92 – – – 562 474 223 118 20 27.5 72 2.104
033N0803 033N0303 F220 H 5040 125 5" 130 102 92 – – – 562 474 223 118 20 27.5 72 2.104
  033P0301 F250 B – 190 – – – – 162 132 M20 628 532 254 125 25 29.5 104 3.505
Bore must be specified at time of quotation request and also on the order.

Dimensions in millimeters unless otherwise stated.

G is the amount by which clamping screws need to be withdrawn to release tire
J is the wrench clearance to allow for tightening and loosening the bush on the shaft and the clamp ring screws on sizes F40, F50 and F60. The use of a shortened wrench will allow this dimension to be reduced.
M is half the distance between flanges. Shaft ends, although normally located twice M apart, can project beyond the flanges as shown. In this event allow sufficient space between shaft ends for end float and misalignment.
Mass and inertia figures are for single flange with mid range bore and include clamping ring, screws and washers and half tire.
Flanges are also available finish bored with keyway if required.
Bore must be specified at time of quotation request and also on the order.

How to order:
Taper Lock bushed versions - R609-part no-bore example: R609-033A0802-20
Bored body versions - R609-size-bore example: R609-F40-20

Note: many of these products are not normally stocked in the USA, so please allow sufficient lead time for delivery.

Tyre Part Numbers
Size Natural Natural F.R.A.S. F.R.A.S.
F40 033A0048 F40NA 033A0068 F40FR
F50 033B0048 F50NA 033B0068 F50FR
F60 033C0048 F60NA 033C0068 F60FR
F70 033D0048 F70NA 033D0068 F70FR
F80 033E0048 F80NA 033E0069 F80FR
F90 033F0048 F90NA 033F0068 F90FR
F100 033G0048 F100NA 033G0068 F100FR
F110 033H0048 F110NA 033H0068 F110FR
F120 033J0048 F120NA 033J0068 F120FR
F140 033K0048 F140NA 033K0068 F140FR
F160 033L0048 F160NA 033L0068 F160FR
F180 033Q0048 F180NA 033Q0068 F180FR
F200 033M0048 F200NA 033M0068 F200FR
F220 033N0048 F220NA 033N0068 F220FR
F250 033P0048 F250NA 033P0068 F250FR

Tyre size weight table
F40T 0.10 kg F80T 1 kg F120T 2.3 kg F200T 8 kg
F50T 0.30 kg F90T 1.1 kg F140T 2.6 kg F220T 10 kg
F60T 0.50 kg F100T 1.1 kg F160T 3.4 kg F250T 15 kg
F70T 0.70 kg F110T 1.4 kg F180T 7.7 kg    


FLEXIBLE TYRE CODE NUMBERS
Unless otherwise specified Fenaflex flexible tyres will be supplied in a natural rubber compound which is suitable for operation in temperatures -50° C to +50° C. A chloroprene compound is available which is Fire Resistant and Anti-Static (FRAS) and has greater resistance to heat and oil. This is suitable for operation in temperatures -15° C to +70° C. For temperatures outside these ranges - consult your local Authorised Distributor. The FRAS tyre variant is used with specifically modified metal flanges to create the ATEX approved variant

Maryland Metrics order codes for tyres:
Natural = FxxxT example: F120T -- F.R.A.S = FxxxTfras example: F120Tfras

BACK

Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 2002, 2005, 2008, 2009 maryland metrics -- all rights reserved -- ver ee15c fenaflex.htm