 |
|
|
The 'Rivet Nut' Tool   |
| Now Finally Available To The Handyman! The rivet nut tool is an inexpensive alternative to industrial rivet nut setters. Fast and easy to use for the handy man who needs to make sturdy installations requiring a rivet nut fastener. It has unlimited uses. It’s design enables the rivet nuts to be seated tighter than with conventional tools. This fastening tool has unlimited uses! | ||||
| The rivet nut possesses far greater load bearing capability than a regular sheet metal screw! Proudly made in USA. Use it instead of a sheet metal screw. It has unlimited uses. It’s compact design takes up less room in your tool box. For use with aluminum or steel rivet nuts. |  |
|||
 |
||||
| Completely retract the slide and install rivet nut finger tight on the stud. Place the stabilizing rod in the provided hole. Insert rivet nut into the drilled hole and tighten the slide screw to draw the slide up the ramp. A light coating of grease on the ramp and a drop of oil on the tightening screw will ease the operation of the tool. Typically, the slide will be 0” to ¼” closed, depending on the thickness of material, when using ¼-20 rivet nuts. This will set the rivet nut. [When using the 10-32, test to see how far to draw the slide up the ramp. Usually 1/8” to 3/8” gap.] Additional rivet nuts in both metric and inch sizes are available from Maryland Metrics or call (800) 638-1830 |
||||
|
TIP: To speed up operation, use a 7/16"
socket on a variable speed drill. |
||||
|
Top quality, made in USA, (part number R013-RSD7) 7/16" socket driver. $5.95 | ||||
| This procedure sets the rivet nut in place providing an anchor point where you cannot normally install a regular nut and bolt. For more information on this exciting new rivet nut tool click here now. | ||||
| First time,
pays for itself! |
||||
 |
||||
| Patent Pending |
||||
  |
||||
| works with either style rivet nut | ||||
